Ethernet Statistics; Radio Test; Rtu Simulator - GE MDS SD Series Technical Manual

Ethernet Statistics

RTU Simulator

58
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-8461-MDS-UP-SD9-MS2ES-Upgrade-Key-SD9-MS-to-SD9-ES.aspx
This screen presents a detailed summary of packets received and trans-
mitted, dropped packets, errors, overruns of the buffer, RX data rate
(bps), and RX/TX data for Unicast, Multicast, and Broadcast transmis-
sions.
• —Clicking this button resets the displayed statistic
Clear Statistics
counts.
• —Clicking this button updates the displayed statistics on
Refresh
demand.
• —Initiates automatic updating of statistics. A time (in sec-
Auto
onds) may be entered in the box provided, to specify how often
the display is updated.

Radio Test

The Radio Test functions are a collection of tools useful for testing the
RF performance of the transceiver. It provides a way to key (activate)
the transmitter, measure power output, run a spectrum test, and enable
the built-in RTU simulator.
The unit's built-in RTU simulator generates random data similar to what
would be supplied by an external RTU connected to the radio. It is
useful for system testing within the radio network by providing realistic
data to pass over the radio channel.
• —Select
RTU Enable
• —Enter the desired RTU number in this box.
RTU Number
When you are done with these settings, press
apply the changes.
SD Series Technical Manual
or from the drop-down box.
ON OFF
Commit Configuration
MDS 05-4846A01, Rev. D
to