Communications Ports; Com1 Port Settings; Com2 Port Settings - GE MDS SD Series Technical Manual
Secure, long range ip/ethernet & serial
Hide thumbs
Also See for MDS SD Series:
- Reference manual (148 pages) ,
- Technical manual (124 pages) ,
- Quick start manual (4 pages)
Table of Contents
Advertisement
COM1 Port Settings
COM2 Port Settings
50
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-8461-MDS-UP-SD9-MS2ES-Upgrade-Key-SD9-MS-to-SD9-ES.aspx
•
—Enables or disables multihost capability.
Multihost Enable
•
—Sets the desired delay time (in ms) for switching
Multihost Delay
between hosts during multihost operation.
Communications Ports
•
—The default mode for
Startup Mode
transceiver is first powered up, but the startup mode may also be
set to
if the port is to be used for passing payload data.
Data
•
—The mode setting for the
Current Mode
changed on demand (
•
—The default data rate for
Data Baud Rate
it may be set to any of the following speeds: 300, 1200, 2400,
4800, 9600, 19200, 38400, 57600, 115200.
•
—The default data format for the transceiver is 8 char-
Data Format
acter bits, no parity, and 1 stop bit (8N1). A number of settings are
possible as listed below:
8 character bits, no parity, 1 stop bit (Default)
8 character bits, no parity, 2 stop bits
8 character bits, odd parity, 1 stop bit
8 character bits, odd parity, 2 stop bits
8 character bits, even parity, 1 stop bit
8 character bits, even parity, 2 stop bits
7 character bits, no parity, 1 stop bit
7 character bits, no parity, 2 stop bits
7 character bits, odd parity, 1 stop bit
7 character bits, odd parity, 2 stop bits
7 character bits, even parity, 1 stop bit
7 character bits, even parity, 2 stop bits
•
—Any combination of the three Virtual Radio
Talk on/Listen to
Channels may be entered in these menu fields. For more informa-
tion on how these settings are used, refer to the SD Serial/Telnet
Management Supplement, Part No. 05-6193A01 more informa-
tion.
is the standard port used for connection of serial payload data.
COM2
The
screen contains a number of settings that may be
COM2 Port Settings
configured to suit the needs of your system.
SD Series Technical Manual
is
COM1
Console
COM1
or
) using this selection.
Console
Data
COM1
MDS 05-4846A01, Rev. D
when the
port may be
is 115200 bps, but
Advertisement
Table of Contents
