GE MDS SD Series Technical Manual page 45

Category
MDS 05-4846A01, Rev. D
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-8461-MDS-UP-SD9-MS2ES-Upgrade-Key-SD9-MS-to-SD9-ES.aspx
Table 11. Common Tasks with Device Manager (Continued)
Task
If you wish to...
Set Password for radio
Set Device Security (enable/disable local login
requirement, enable/disable Telnet access)
Set Wireless Security parameters (Encryption
on/off, phrase, DLINK Security on/off)
Configure the IP settings (Static IP Address,
Static IP Netmask, Static Default Gateway,
DHCP enable/disable, Virtual Radio
Channels–VRCs)
Configure Ethernet Bridging
Configure the Ethernet Port settings
(Enable/disable port, set mode, Local IP Port,
Destination IP Address, Destination IP Port,
TCP Keepalive time)
Configure COM1 settings (Startup mode, Data
Baud Rate, Data format, Virtual Radio
Channels–VRCs)
Configure COM2 settings (Mode, Baud Rate,
Format, Buffer on/off, Device Type, Virtual
Radio Channels–VRCs)
SD Series Technical Manual
Refer to this Screen
Configuration>>
Security>>
Login Password, Page 53
Configuration>>
Security>>
Device Security, Page 52
Configuration>>
Security>>
Wireless Security, Page 53
Configuration>>
Communication Ports>>
IP Configuration, Page 51
Configuration>>
Features>>
Bridge Configuration, Page
47
Configuration>>
Communication Ports>>
IP Configuration, Page 51
Configuration>>
Communication Ports>>
COM1 Port Settings, Page
50
Configuration>>
Communication Ports>>
COM2 Port Settings, Page
50
37