GE MDS SD Series Technical Manual page 46

Category
38
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-8461-MDS-UP-SD9-MS2ES-Upgrade-Key-SD9-MS-to-SD9-ES.aspx
Table 11. Common Tasks with Device Manager (Continued)
Task
If you wish to...
View Radio Performance data (Power Output,
Signal-to-Noise Ratio, Received Signal
Strength, DC Input voltage, operating
temperature)
Perform radio tests (Radio Keying, run
Spectrum Analyzer, run RTU Simulator)
View Bootloader version information, Active
Firmware Image, Firmware Version level
Locally Reprogram the Transceiver via TFTP
transfer
Broadcast Remote Configuration settings to all
radios in the network
Work with Configuration Files...
–Restore Factory default configuration
–Save/restore user configuration
–View/restore key configuration parameters
–Save/load key configuration parameters
using file transfer (TFTP)
Start radio network reprogramming (and monitor
progress)
Perform Ethernet PING to local Ethernet host
Test communications to specific Remote radio
Enter a Factory Authorization code, or view
currently enabled features
View active Alarms/Events
View logged Events
Set alarm signal output (active high/low)
View I/O Statistics for COM1, COM2, Ethernet
Port, Remote Programming, Ethernet Interface,
Data Link Layer, and MAC)
SD Series Technical Manual
Refer to this Screen
Maintenance & Status>>
Performance>>
Radio Performance, Page
57
Maintenance & Status>>
Radio Test, Page 58
Maintenance & Status>>
Firmware Utilities>>Version
Information, Page 62
Maintenance & Status>>
Firmware Utilities>>TFTP
Reprogramming, Page 63
Maintenance & Status>>
Firmware Utilities>>
Remote Reprogramming,
Page 64
Maintenance & Status>>
Configuration Files, Page
67
Maintenance & Status>>
Firmware Utilities>>
Remote Reprogramming,
Page 64
Maintenance & Status>>
Radio Test>>Ping Test,
Page 60
Maintenance & Status>>
Radio Test>>Link Test,
Page 59
Maintenance & Status>>
Firmware Utilities>>
Authorization Codes, Page
66
Maintenance & Status>>
Alarm Summary, Page 55
Maintenance & Status>>
Event Log, Page 55
Maintenance & Status>>
Alarm Summary>>
Alarm Signal Configuration,
Page 56
Maintenance & Status>>
Performance>>
I/O Statistics, Page 57
Maintenance & Status>>
Performance>>
Ethernet Statistics, Page 58
MDS 05-4846A01, Rev. D