Performance; Radio Performance; I/O Statistics - GE MDS SD Series Technical Manual

Radio Performance

I/O Statistics

MDS 05-4846A01, Rev. D
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-8461-MDS-UP-SD9-MS2ES-Upgrade-Key-SD9-MS-to-SD9-ES.aspx

Performance

This screen contains several measurement parameters that can be used
to check the operating conditions of the radio.
•
Measured RF Power
output power (in dBm).
• —Read-only indication of the signal-to-noise ratio
Signal to Noise
of received signal.
• —Read-only indication of the received signal strength (in
RSSI
dBm).
• —Read-only indication of the DC supply voltage
DC Voltage
applied to the transceiver.
• —Read-only indication of the chassis temperature
Temperature
(degrees C).
This screen allows viewing transmitted and received bytes on any of the
transceiver interface modules.
• —The drop-down box to the right of this area allows
Module Select
selection of any of the transceiver interface modules:
,
Access Controller Port(s)
. Once a module is selected, click
Reprogram
summary of TX and RX bytes, along with the number of packets
missed, retries, and number of blocks (as applicable, depending
on the interface selected). The display continually refreshes to
show the latest information, and may be cleared at any time by
selecting
Clear Module Statistics
• —Clicking this button updates the displayed statistics on
Refresh
demand.
• —Initiates automatic updating of statistics. A time (in sec-
Auto
onds) may be entered in the box provided, to specify how often
the display is updated.
SD Series Technical Manual
—Read-only indication of the measured RF
, , ,
COM1 COM2 IP Payload Port 1
.
,
All Media
, , ,
2 3 Remote
to view a
Set Module
57