GE MDS SD Series Technical Manual page 100

RF, chart for converting dBm-Watts-Volts 89
specifications 83
Procedures
checking for alarms (STAT command) 71
downloading new software 76
mounting the transceiver 17
network-wide diagnostics 75, 81, 83
troubleshooting 69–73
Product
description 3, 4
model number codes 6
Protected Network Station
definition of 7
PWR
LED 30
R
Radio
Configuration Software 76
inoperative (troubleshooting chart) 70
no synchronization with master (troubleshooting chart) 70
poor performance (troubleshooting chart) 70
Receiver
specifications 83
system specifications 82
Redundant operation, defined 87
Remote
Station, defined 87
Station, illustrated 16
RTU (Remote Terminal Unit)
defined 87
S
SCADA (Supervisory Control And Data Acquisition),
defined 87
Signal
loss due to coaxial cable length at 960 MHz, table 19
Simplex 10
Sleep mode
shown by PWR LED status indicator 30
Software
diagnostics and control used from PC 76
upgrading 76
Specifications
diagnostics interface 83
environment 83
power 83
receiver 83
receiver system 82
transmitter 82
transmitter system 82
Standing Wave Ratio—See SWR. 87
Supervisory Control And Data Acquisition—See SCADA. 88
SWR (Standing Wave Radio), defined 88
T
Tables
alarm code definitions 72
conversions, dBm-Watts-Volts 89
LED status indicators 30
length vs. loss in coaxial cables at 960 MHz 19
troubleshooting 70
Technical reference 74–89
Transceiver
diagnostics using PC software 76
I-2
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-8461-MDS-UP-SD9-MS2ES-Upgrade-Key-SD9-MS-to-SD9-ES.aspx
mounting 25
mounting instructions 17
upgrading software 76
Transmitter
specifications 82
system specifications 82
Troubleshooting 69–73
performing network-wide diagnostics 75, 81, 83
STAT command (Status) 71
table 70
using PC software for 76
SD Series Technical Manual MDS 05-4846A01, Rev. D