Adjusting Humidification Settings; Adjusting Dehumidification Settings - Honeywell THX9321 Prestige 2.0 Product Data

Depending on how your thermostat was installed, it may delay
for up to 30 minutes before switching to REMOTE SETBACK
settings. This delay allows the room to stay comfortable if the
room is unoccupied for only a short time.

Adjusting humidification settings

1. Touch MENU and select Humidification.
Humidifica on
Fig. 111.
2. Select Auto.
3. Move the slider bar to select humidity level.
Fig. 112.
4. Touch More Settings if frost or condensation appears on
the windows. Use a lower number to prevent frost or con-
densation. Use a higher number if indoor air is too dry.
Window Protection limits the amount of humidity to pre-
vent frost or condensation on windows. See notes below.
Fig. 113.
5. Touch Done to save your settings. Touch Cancel to
ignore changes.
6. Window Protection is set on a scale from 1–10. A setting
of 1 represents poorly insulated windows and a setting of
10 represents well insulated windows. A lower number
automatically reduces the humidity to help prevent frost
THX9321 PRESTIGE
MENU
More
Se ngs
®
2.0 AND THX9421 PRESTIGE
or condensation on your windows. Use a higher number
if indoor air seems too dry. To prevent frost/condensation
on your windows during cold outdoor temperatures,
poorly insulated windows require a lower Window Pro-
tection setting, which will limit how much your humidifier
can run.
7. After you set the Window Protection setting, check for
frost/condensation on your windows in the morning. If
frost/condensation is present, adjust the Window Protec-
tion setting to the next lowest number and check for frost/
condensation on your windows the next morning. Con-
tinue to adjust the Window Protection setting to a lower
number until frost/condensation is no longer present.
NOTE: The thermostat will not run the humidifier when
the indoor humidity has reached the "Window
Limit" that is displayed on the screen.
NOTE: Window Protection is available only if an outdoor
air sensor is installed.

Adjusting dehumidification settings:

residential use
This feature can control a dehumidifier or use your air
conditioner to reduce humidity.
1. Touch MENU and select Dehumidification.
Dehumidifica on
2. Select Auto.
3. Move the slider bar to select humidity level.
4. Touch Done to save your settings. Touch Cancel to
ignore changes.
NOTE: If your air conditioner is used to control humidity,
the temperature may drop up to 3° F below your
temperature setting until humidity reaches the
desired level.
79
®
IAQ WITH EIM
MENU
Fig. 114.
More
Se ngs
Fig. 115.
68-0311—02