Ramp Rates - Honeywell THX9321 Prestige 2.0 Product Data

4. Touch  or  to select the Heat and Cool temperatures.
Fig. 290.
5. Review the settings and touch Done to save them. Touch
Back, then Cancel to ignore the changes.
Setting holiday override:
commercial use
This feature lets you customize temperature settings to be
maintained from now until a specified date. The thermostat
resumes normal scheduling on the date you select.
1. Touch MENU.
Fig. 291.
2. Select Holiday Mode to display temperatures while you
are away on holiday.
Holiday Mode
Fig. 292.
3. Touch  or  to select the Heat and Cool temperatures,
then touch Next to select return date.
Fig. 293.
THX9321 PRESTIGE
4. Review the settings and touch Done to save them. Touch
Back, then Cancel to ignore the changes.
NOTE: The cool temperature can only be set higher than
Initiating occupancy mode:
commercial use
This feature keeps temperature at an energy-saving level until
you touch Press to start occupancy. When you arrive, touch the
button to maintain a comfortable temperature while the room is
occupied.
MENU
Touch the  or  buttons to set the temperature or the Hold
Until time. The temperature is maintained until the time you set.
Temperature returns to an energysaving level after the timer
expires, or the "Occupied" period ends.
NOTE: This feature is available only when programmed

Ramp Rates

When the ramp rate is set to Off, the thermostat begins
recovery at the scheduled time.
When a ramp rate is set, recovery begins early to reach the
setpoint by the program time. Based on your recovery ramp
setting and how far the thermostat is set back, the thermostat
determines how early to turn on the system.
If an outdoor sensor is installed, you can set outdoor
temperatures for mild, cold and hot days in your region. By
setting these outdoor temperatures, the thermostat will
123
®
2.0 AND THX9421 PRESTIGE
Fig. 294.
the unoccupied program setting and the heat tem-
perature can only be set lower than the unoccu-
pied program setting.
Press to start
occupancy
Fig. 295.
by the installer.
®
IAQ WITH EIM
Done
68-0311—02