Graceful Shutdown - Cisco MDS 9000 Series Configuration Manual

Interface
Hide thumbs Also See for MDS 9000 Series:
Table of Contents

Advertisement

Configuring Interfaces
Reason Code (Long Version)
Isolation due to ELP failure
Isolation due to ESC failure
Isolation due to domain overlap
Isolation due to domain ID
assignment failure
Isolation due to the other side of the
link E port isolated
Isolation due to invalid fabric
reconfiguration
Isolation due to domain manager
disabled
Isolation due to zone merge failure
Isolation due to VSAN mismatch
Nonparticipating
Port Channel administratively down
Suspended due to incompatible speed
Suspended due to incompatible mode
Suspended due to incompatible
remote switch WWN

Graceful Shutdown

Interfaces on a port are shut down by default (unless you modified the initial configuration).
The Cisco NX-OS software implicitly performs a graceful shutdown in response to either of the following
actions for interfaces operating in the E port mode:
• If you shut down an interface.
• If a Cisco NX-OS software application executes a port shutdown as part of its function.
Description
The port negotiation failed.
The port negotiation failed.
The Fibre Channel domains (fcdomain) overlap.
The assigned domain ID is not valid.
The E port at the other end of the link is isolated.
The port is isolated due to fabric reconfiguration.
The fcdomain feature is disabled.
The zone merge operation failed.
The VSANs at both ends of an ISL are different.
FL ports cannot participate in loop operations. This might
occur if more than one FL port exists in the same loop, in
which case, all but one FL port in that loop automatically
enters nonparticipating mode.
The interfaces belonging to a port channel are down.
The interfaces belonging to a port channel have
incompatible speeds.
The interfaces belonging to a port channel have
incompatible modes.
An improper connection is detected. All interfaces in a
port channel must be connected to the same pair of
switches.
Cisco MDS 9000 Series Interfaces Configuration Guide, Release 8.x
Graceful Shutdown
Applicable
Modes
Only E
ports and
TE ports
Only FL
ports and
TL ports
Only port
channel
interfaces
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents