Cisco MDS 9000 Series Configuration Manual page 115

Configuring Fibre Channel Interfaces
fc2/10
fc2/11
fc2/12
...
Port-Group 4
Total bandwidth is 12.8 Gbps
Total shared bandwidth is 12.8 Gbps
Allocated dedicated bandwidth is 0.0 Gbps
--------------------------------------------------------------------
Interfaces in the Port-Group
--------------------------------------------------------------------
fc2/37
fc2/38
fc2/39
fc2/40
fc2/41
fc2/42
fc2/43
fc2/44
fc2/45
fc2/46
fc2/47
fc2/48
Step 2 Shut down all shared ports for which you want to remove restrictions on oversubscription ratios.
Example:
switch (config)# interface fc2/1-2, fc2/4-5, fc2/8-38, fc2/43-48
switch (config-if)# shutdown
Step 3 Display the interface status to confirm the shutdown of all shared ports.
Example:
switch(config-if)# end
switch# show interface brief
-------------------------------------------------------------------------------
Interface Vsan
-------------------------------------------------------------------------------
fc2/1 1
fc2/2 1
fc2/3 1
fc2/4 1
fc2/5 1
fc2/6 1
fc2/7 1
fc2/8 1
...
fc2/48 1
Step 4
Disable restrictions on oversubscription ratios for the ports.
Example:
switch# config t
Enter configuration commands, one per line.
B2B Credit
Buffers
Admin Admin Status
Mode Trunk
Mode
FX -- down
FX -- down
T -- up
FX -- down
FX -- down
TE -- up
TE -- up
FX -- down
FX -- down
Cisco MDS 9000 Series Interfaces Configuration Guide, Release 8.x
16 4.0 shared
16 4.0 shared
16 4.0 shared
Bandwidth Rate Mode
(Gbps)
16 4.0 shared
16 4.0 shared
16 4.0 dedicated
16 4.0 dedicated
16 4.0 dedicated
16 4.0 shared
16 4.0 shared
16 4.0 shared
16 4.0 shared
16 4.0 shared
16 4.0 shared
16 4.0 shared
SFP Oper Oper
Mode Speed
(Gbps)
swl --
swl --
swl --
swl --
swl --
swl --
swl --
swl --
sw1 --
End with CNTL/Z.
Examples
Port
Channel
--
--
--
--
--
--
--
--
--
97