Cisco MDS 9000 Series Configuration Manual page 87

Configuring Interfaces
channel-group 11 force
no shutdown
The following example displays the running configuration information for a specified interface. The
interface configuration commands are grouped together:
Displays the Running Configuration for a Specified Interface
switch# show running-config interface fc1/1
interface fc9/1
switchport speed 2000
switchport mode E
channel-group 11 force
no shutdown
Displays the Running Configuration after the System Default Switchport Mode F Command is
Executed, on page 69
F command is executed.
The following example displays the running configuration after the system default switchport mode
F command is executed:
Displays the Running Configuration after the System Default Switchport Mode F Command is Executed
switch# show running-config
version 3.1(3)
system default switchport mode F
interface fc4/1
interface fc4/2
interface fc4/3
interface fc4/4
interface fc4/5
interface fc4/6
interface fc4/7
interface fc4/8
interface fc4/9
interface fc4/10
The following example displays the running configuration after two interfaces are individually
configured for FL mode:
Displays the Running Configuration after Two Interfaces are Individually Configured for Mode FL
switch# show running-config
version 3.1(3)
system default switchport mode F
interface fc4/1
switchport mode FL
interface fc4/2
interface fc4/3
switchport mode FL
interface fc4/4
interface fc4/5
interface fc4/6
interface fc4/7
displays the running configuration after the system default switchport mode
Cisco MDS 9000 Series Interfaces Configuration Guide, Release 8.x
Displaying Interface Information
69