Verifying Portchannel Configuration - Cisco MDS 9000 Series Configuration Manual

Configuring PortChannels

Verifying PortChannel Configuration

To display PortChannel configuration information, perform one of the following tasks:
Command
show port-channel summary
show port-channel database
show port-channel consistency
show port-channel consistency detail
show port-channel usage
show port-channel
compatibility-parameters
show interface fc slot/port
show port-channel database interface
port-channel number
For detailed information about the fields in the output from these commands, refer to the
Series NX-OS Command
You can view specific information about existing PortChannels at any time from EXEC mode. The following
show commands provide further details on existing PortChannels. You can force all screen output to go to a
printer or save it to a file. See Examples
PortChannel Summary, on page
Displays the PortChannel Summary
switch# show port-channel summary
------------------------------------------------------------------------------
Interface
------------------------------------------------------------------------------
port-channel 77
port-channel 78
port-channel 79
Purpose
Displays a summary of PortChannels within the switch. A one-line
summary of each PortChannel provides the administrative state,
the operational state, the number of attached and active interfaces
(up), and the first operational port (FOP), which is the primary
operational interface selected in the PortChannel to carry
control-plane traffic (no load-balancing). The FOP is the first port
that comes up in a PortChannel and can change if the port goes
down. The FOP is also identified by an asterisk ( * ).
Displays the PortChannel configured in the default ON mode and
ACTIVE mode.
Displays the consistency status without details.
Displays the consistency status with details.
Displays the PortChannel usage.
Displays the PortChannel compatibility.
Displays autocreated PortChannels.
Displays the specified PortChannel interface.
Reference.
Displays the PortChannel Summary, on page 239
239.
Total Ports
2
2
2
Cisco MDS 9000 Series Interfaces Configuration Guide, Release 8.x
Verifying PortChannel Configuration
Oper Ports First Oper Port
0 --
0 --
2 fcip200
Cisco MDS 9000
to Displays the
239