Cisco MDS 9000 Series Configuration Manual page 83

Configuring Interfaces
Port vsan is 1
Admin Speed is auto
Operating Speed is 32 Gbps
Rate mode is dedicated
Port flow-control is ER_RDY
Transmit B2B Credit for vl0 is 15
Transmit B2B Credit for vl1 is 15
Transmit B2B Credit for vl2 is 40
Transmit B2B Credit for vl3 is 430
Receive B2B Credit for vl0 is 15
Receive B2B Credit for vl1 is 15
Receive B2B Credit for vl2 is 40
Receive B2B Credit for vl3 is 430
B2B State Change Number is 14
Receive data field Size is 2112
Beacon is turned off
fec is enabled by default
Logical type is core
FCSP Status: Successfully authenticated
Trunk vsans (admin allowed and active) (1-7,200,400)
Trunk vsans (up)
Trunk vsans (isolated)
Trunk vsans (initializing)
5 minutes input rate 1175263296 bits/sec,146907912 bytes/sec, 67007 frames/sec
5 minutes output rate 1175266272 bits/sec,146908284 bytes/sec, 67007 frames/sec
Interface last changed at Mon Apr 24 23:11:49 2017
Last clearing of "show interface" counters :
The following example displays the description of interfaces:
Displays Port Description
switch# show interface description
-------------------------------------------------------------------------------
Interface
-------------------------------------------------------------------------------
fc3/1
fc3/2
fc3/3
fc3/4
fc3/5
fc3/6
fc3/10
fc3/11
fc3/12
fc3/16
8570830922 frames input,18718506849280 bytes
0 discards,0 errors
0 invalid CRC/FCS,0 unknown class
0 too long,0 too short
8570675128 frames output,18718166747180 bytes
0 discards,0 errors
0 input OLS,0 LRR,0 NOS,0 loop inits
1 output OLS,3 LRR, 0 NOS, 0 loop inits
70 receive B2B credit remaining
500 transmit B2B credit remaining
485 low priority transmit B2B credit remaining
Description
test intest
--
--
TE port
--
--
Next hop switch 5
--
--
--
(1-7)
(200,400)
()
never
Cisco MDS 9000 Series Interfaces Configuration Guide, Release 8.x
Displaying Interface Information
65