Default Settings - Cisco MDS 9000 Series Configuration Manual

Configuring PortChannels

Default Settings

Table 29: Default PortChannel Parameters , on page 231
Table 29: Default PortChannel Parameters
Parameters
PortChannels
Create PortChannel
Default PortChannel mode
Autocreation
Default
FSPF is enabled by default.
Administratively up.
ON mode on non-NPV and NPIV core switches.
ACTIVE mode on NPV switches.
Disabled.
Cisco MDS 9000 Series Interfaces Configuration Guide, Release 8.x
lists the default settings for PortChannels.
Default Settings
231