Cisco MDS 9000 Series Configuration Manual page 121

Configuring Fibre Channel Interfaces
Disabling ACL Adjacency Sharing for System Image Downgrade
the system image on your switch to a release prior to Cisco SAN-OS Release 3.0(3), enter the following
command in EXEC mode:
switch# system no acl-adjacency-sharing
To reenable Fibre Channel ACL adjacency sharing on your switch, enter the following command in EXEC
mode:
switch# system acl-adjacency-sharing
Cisco MDS 9000 Series Interfaces Configuration Guide, Release 8.x
103