Default Settings - Cisco MDS 9000 Series Configuration Manual

Configuring Trunking

Default Settings

Table 26: Default Trunk Configuration Parameters , on page 209
Table 26: Default Trunk Configuration Parameters
Parameters
Switch port trunk mode
Allowed VSAN list
Allowed VF-ID list
Trunking protocol on E ports
Trunking protocol on F ports
Default
ON on non-NPV and MDS core switches.
OFF on NPV switches.
1 to 4093 user-defined VSAN IDs.
1 to 4093 user-defined VF-IDs.
Enabled.
Disabled.
Cisco MDS 9000 Series Interfaces Configuration Guide, Release 8.x
lists the default settings for trunking parameters.

Default Settings

209