Cisco MDS 9000 Series Configuration Manual page 207

Congestion Detection, Avoidance, and Isolation
PMON detected list for vsan 3
===============================================
21:00:00:24:ff:4f:70:46(0x040020)
fc2/9 marked slow
PMON detected list for vsan 4
===============================================
PMON detected list for vsan 5
===============================================
3. Remove the interface from being marked as slow.
switch# congestion-isolation remove interface fc2/9
interface from being marked as slow by PMON
4. Verifying if the interface is removed from being detected as slow.
switch# show congestion-isolation pmon-list
PMON detected list for vsan 1
===============================================
PMON detected list for vsan 2
===============================================
PMON detected list for vsan 3
===============================================
<<<<<<<<<<<<<<< host behind interface fc2/9 removed from isolation
PMON detected list for vsan 4
===============================================
PMON detected list for vsan 5
===============================================
Configuration Examples for Congestion Isolation
: PWWN(FCID)
<<<<<<<<<<<<<<<<<<<<<<host behind interface
: PWWN(FCID)
: PWWN(FCID)
: PWWN(FCID)
: PWWN(FCID)
: PWWN(FCID)
: PWWN(FCID)
: PWWN(FCID)
Cisco MDS 9000 Series Interfaces Configuration Guide, Release 8.x
<<<<<<<<<<< CLI to remove an
189