Electric Power Network Specification; Motor Connection Data - ABB ACS310 User Manual

348 Technical data

Electric power network specification

Voltage (U )
1
Short-circuit capacity
Frequency
Imbalance

Motor connection data

Motor type
Voltage (U )
2
Short-circuit protection
(IEC 61800-5-1,
UL 508C)
Frequency
Frequency resolution
Current
Power limit
Field weakening point
Switching frequency
Maximum
recommended
motor cable length
www.aotewell.com
200/208/220/230/240 V AC 1-phase for 200 V AC drives
200/208/220/230/240 V AC 3-phase for 200 V AC drives
380/400/415/440/460/480 V AC 3-phase for 400 V AC drives
±10% variation from converter nominal voltage is allowed as default.
Maximum allowed prospective short-circuit current at the input power
connection as defined in IEC 60439-1 is 100 kA. The drive is suitable
for use in a circuit capable of delivering not more than 100 kA rms
symmetrical amperes at the drive maximum rated voltage.
50/60 Hz ± 5%, maximum rate of change 17%/s
Max. ±3% of nominal phase to phase input voltage
AC induction motor
0 to U , 3-phase symmetrical, U
1
The motor output is short-circuit proof by IEC 61800-5-1 and
UL 508C.
0...500 Hz
0.01 Hz
See section Ratings
1.5 · P
N
10...500 Hz
4, 8, 12 or 16 kHz
Operational functionality and motor cable length
The drive is designed to operate with optimum performance with the
following maximum motor cable lengths. The motor cable lengths may
be extended with output chokes as shown in the table.
Frame
size
Standard drive, without external options
R0
R1...R4
With external output chokes
R0
R1...R4
sales@aotewell.com
at the field weakening point
max
on page 336.
Maximum motor cable length
m
30
50
60
100
Industry Automation
ft
100
165
195
330
+86-755-8660-6182