•
Technical data
ratings, sizes and technical requirements as well as provisions for fulfilling the
requirements for CE and other marks.
•
Dimension drawings
•
Further information
and service inquiries, get information on product training, provide feedback on
ABB Drives manuals and find documents on the Internet.
Related documents
See
List of related manuals
Categorization by frame size
The ACS310 is manufactured in frame sizes R0...R4. Some instructions and other
information which only concern certain frame sizes are marked with the symbol of the
frame size (R0...R4). To identify the frame size of your drive, see the table in section
Ratings
on page 336.
Terms and abbreviations
Term
Definition
EIA-485
Standard defining the electrical characteristics of drivers and receivers for
use in balanced digital multipoint systems.
EMC
Electromagnetic compatibility
FlashDrop
Hand-held drive programming tool that can also be used to copy parameters
to a drive that is not powered up.
Frame (size)
Relates to the construction type of the component in question. The term is
often used in reference to a group of components that share a similar
mechanical construction. To determine the frame size of a component, refer
to the rating tables in chapter
IGBT
Insulated gate bipolar transistor; a voltage-controlled semiconductor type
widely used in inverters due to its easy controllability and high switching
frequency.
Inverter
An inverter converts the DC voltage to AC voltage. Its operation is controlled
by switching the IGBTs.
I/O
Input/Output
MMP
Manual motor protector
Modbus RTU
Open, serial messaging protocol
MREL
MREL relay output extension module
MRP code
Material Requirement Planning code
Pt100
A type of resistance thermometer (temperature sensor)
PTC
Positive Temperature Coefficient sensor (temperature sensor)
RS-232
Standard for serial binary single-ended data and control signals
www.aotewell.com
(page 335) contains technical specifications of the drive, eg
(page 357) shows dimension drawings of the drive.
(inside of the back cover, page 353) tells how to make product
on page 2.
sales@aotewell.com
Introduction to the manual 21
Technical
data.
Industry Automation
+86-755-8660-6182