Pump Cleaning - ABB ACS310 User Manual

All parameters
No. Name/Value
DONE
RESET
46 PUMP CLEANING Set-up of pump cleaning.
4601 PUMP CLEAN
TRIG
NOT SEL
DI1
DI2
DI3
DI4
DI5
DI1/SUP1OVR Enable on the rising edge of digital input DI1 or
DI2/SUP1OVR See selection DI1/SUP1OVR.
DI3/SUP1OVR See selection DI1/SUP1OVR.
DI4/SUP1OVR See selection DI1/SUP1OVR.
DI5/SUP1OVR See selection DI1/SUP1OVR.
www.aotewell.com
Description
Reset not requested (normal operation).
Reset energy counters, The value reverts automatically to
DONE.
Defines how the Pump cleaning function is triggered. The
pump cleaning sequence consists of forward and reverse
"steps".
Forward
4602
Reverse
4607 4605 4604
WARNING! Before enabling the Pump cleaning
function, ensure it is safe to perform the pump cleaning
sequence with the connected equipment.
Notes:
The Pump cleaning function overrides parameter
DIRECTION.
The Pump cleaning function observes the maximum forward
and reverse frequencies (parameters
FREQ and 2008 MAXIMUM
The Pump cleaning function always uses acceleration time
2 (parameter 2205) and deceleration time 2 (parameter
2206).
The drive must be ready and its Run enable signal must be
present before the pump cleaning sequence can start.
No triggering source defined.
Trigger on the rising edge of digital input DI1
See selection DI1.
See selection DI1.
See selection DI1.
See selection DI1.
OVER (parameter 1401 RELAY OUTPUT
parameter group 32 SUPERVISION.
sales@aotewell.com
Actual signals and parameters 257
4603
4606 4604 4605 4604
4608
2007 MINIMUM
FREQ).
1). See
Industry Automation
Def/FbEq
0
1
NOT SEL
t
1003
0
1
2
3
4
5
SUPRV1 7
8
9
10
11
+86-755-8660-6182