ABB ACS310 User Manual page 178

178 Actual signals and parameters
All parameters
No. Name/Value
COMM
TIMED FUNC 1 Timed start/stop control. Timed function 1 active = start,
TIMED FUNC 2 See selection
TIMED FUNC 3 See selection
TIMED FUNC 4 See selection
DI5
DI5,4
SUPRV1
OVER
SUPRV1
UNDER
SUPRV2
OVER
SUPRV2
UNDER
SUPRV3
OVER
SUPRV3
UNDER
SUP1OVER+
DI2
SUP1
UDR+DI2
1002 EXT2
COMMANDS
1003 DIRECTION
FORWARD
www.aotewell.com
Description
Fieldbus interface as the source for the start and stop
commands, ie Control word
0...1. The Control word is sent by the fieldbus controller
through the embedded fieldbus (Modbus) to the drive. For
the Control word bits, see section
profile on page 307.
timed function 1 inactive = stop. See parameter group
TIMED FUNCTIONS.
TIMED FUNC
TIMED FUNC
TIMED FUNC
Start and stop through digital input DI5. 0 = stop, 1 = start.
Direction is fixed according to parameter
(setting REQUEST = FORWARD).
Start and stop through digital input DI5. 0 = stop, 1 = start.
Direction through digital input DI4. 0 = forward, 1 = reverse.
To control direction, parameter
REQUEST.
Start when the value of supervision parameter 1 goes over
the supervision high limit. Stop when the value goes below
the low limit. See parameter group
Start when the value of the supervision parameter 1 goes
below the supervision low limit. Stop when the value goes
over the high limit. See parameter group
See selection SUPRV1
See selection SUPRV1
See selection SUPRV1
See selection SUPRV1
Start and stop as for
digital input DI2. 0 = forward, 1 = reverse. To control
direction, parameter
REQUEST.
Start and stop as for
digital input DI2. 0 = forward, 1 = reverse. To control
direction, parameter
REQUEST.
Defines the connections and the source for the start, stop
and direction commands for external control location 2
(EXT2).
See parameter 1001 EXT1
Enables the control of rotation direction of the motor, or fixes
the direction.
Note: The Pump cleaning function can override this
parameter. See parameter
Fixed to forward
sales@aotewell.com
0301 FB CMD WORD 1
DCU communication
1.
1.
1.
1003 DIRECTION
1003 DIRECTION
32 SUPERVISION.
32
OVER.
UNDER.
OVER.
UNDER.
SUPRV1 OVER. Direction through
1003 DIRECTION setting must be
SUPRV1 UNDER. Direction through
1003 DIRECTION setting must be
COMMANDS.
4601 PUMP CLEAN TRIG.
Industry Automation
Def/FbEq
10
bits
11
36
12
13
14
20
21
must be
27
28
SUPERVISION.
29
30
31
32
33
34
NOT SEL
REQUES
T
1
+86-755-8660-6182