ABB ACS310 User Manual page 276

276 Actual signals and parameters
All parameters
No. Name/Value
DI1
www.aotewell.com
Description
Enables the Interlock function and assigns a digital input
(starting with DI1) to the interlock signal for each PFC relay.
These assignments are defined in the following table and
depend on:
• the number of PFC relays (number of parameters
1401...1403 and 1410
• the Autochange function status (disabled if
AUTOCHNG INTERV
No. of Autochange disabled
PFC (Parameter 8118)
relays
0 DI1: Speed reg motor
DI2...DI5: Free
1 DI1: Speed reg motor
DI2: First PFC relay
DI3...DI5: Free
2 DI1: Speed reg motor
DI2: First PFC relay
DI3: Second PFC relay
DI4...DI5: Free
3 DI1: Speed reg motor
DI2: First PFC relay
DI3: Second PFC relay
DI4: Third PFC relay
DI5...DI5: Free
4 DI1: Speed reg motor
DI2: First PFC relay
DI3: Second PFC relay
DI4: Third PFC relay
DI5: Fourth PFC relay
5 Not allowed
sales@aotewell.com
with value = 31 [PFC])
= 0.0, and otherwise enabled).
Autochange enabled
(Parameter 8118)
Not allowed
DI1: First PFC relay
DI2...DI5: Free
DI1: First PFC relay
DI2: Second PFC relay
DI3...DI5: Free
DI1: First PFC relay
DI2: Second PFC relay
DI3: Third PFC relay
DI4...DI5: Free
DI1: First PFC relay
DI2: Second PFC relay
DI3: Third PFC relay
DI4: Fourth PFC relay
DI5: Free
DI1: First PFC relay
DI2: Second PFC relay
DI3: Third PFC relay
DI4: Fourth PFC relay
DI5: Fifth PFC relay
Industry Automation
Def/FbEq
1
8118
+86-755-8660-6182