Labels & Cosmetics - Grizzly G9972Z Owner's Manual

1204
1203
Specifications
Motor: 1 HP, 110V, 1-Ph, 60 Hz
Full-Load Amp Draw: 13.6A
Swing Over Bed: 10-5/8"
Swing Over Cross Slide: 6-3/8"
Distance Between Centers: 26"
Spindle Taper: MT#4
Spindle Bore: 1"
Date
Tailstock Taper: MT#3
Cross Slide Travel: 7"
Compound Travel: 3-1/2" S/N
Weight: 490 lbs.
WARNING!
To reduce risk of serious personal injury while using this machine:
1. Read and understand owner's manual before starting.
2. Always wear approved safety glasses AND a face shield.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up, adjusting, or servicing.
5. Avoid getting entangled in rotating parts—tie back long hair, roll
up sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
6. Rotate workpiece by hand to ensure clearance before starting.
7. Test each new workpiece setup for safe rotation; start with
slowest speed, stand to side of lathe until safe rotation verified.
8. Keep all guards and covers in place during operation.
9. Make sure lathe is properly set up before starting.
10. Change coolant regularly and avoid contact with skin.
11. Never leave chuck key in chuck.
12. Never touch rotating chuck or workpiece with hands.
13. Never leave lathe running unattended.
14. DO NOT reverse spindle rotation while spindle is moving.
15. Properly support long workpieces with an appropriate rest.
16. DO NOT operate when tired or under influence of drug, alcohol.
17. DO NOT expose to rain or use in wet locations.
18. Prevent unauthorized use by children or untrained users; restrict
access or disable machine when unattended.
WARNING!
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.
1202
EYE/FACE INJURY
HAZARD!
Always wear
ANSI-approved safety
glasses and face shield
when using this
machine.
1201
REF PART # DESCRIPTION
1201 P9972Z1201 EYE/FACE INJURY LABEL
1202 P9972Z1202 READ MANUAL LABEL
1203 P9972Z1203 MACHINE ID LABEL
1204 P9972Z1204 THREAD DIAL CHART LABEL
1205 P9972Z1205 PINCH HAZARD LABEL
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
BUY PARTS ONLINE AT GRIZZLY.COM!
-80-
Scan QR code to visit our Parts Store.
Labels & Cosmetics
1206
1207
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
1208
1209
REF PART # DESCRIPTION
1206 P9972Z1206 DISCONNECT POWER LABEL
1207 P9972Z1207 ENTANGLEMENT HAZARD LABEL
1208 P9972Z1208 ELECTRICITY LABEL
1209 P9972Z1209 TOUCH-UP PAINT, GRIZZLY GREEN
1210 P9972Z1210 TOUCH-UP PAINT, GRIZZLY BEIGE
Model G9972Z (Mfd. Since 03/20)
1205
1210
PINCH HAZARD
Always disconnect
power before
opening this
cabinet door.