Table of Contents
Advertisement
782 Machine Labels C
1101
• Label is actual size
G0782 Machine Labels A
• Label must be made of
oil-resistant material
CHECK OIL
LEVELS BEFORE USING!
REFER TO
OWNER'S MANUAL
FOR OIL TYPE AND
AMOUNT.
102 X 102MM
G0782 Machine Labels B
1111
(12/10/14)
WARNING!
Only trained personnel
To reduce risk of death
IMPACT INJURY
should operate this machine.
or serious injury, read
HAZARD!
• Label is actual size
If safe operation procedures
manual BEFORE using
Avoid setting spindle
machine.
• Label must be made of
speed too fast for
are not clearly understood,
(12/10/14)
To get a new manual, call
chuck RPM rating or
oil-resistant material
(800) 523-4777 or go to
get additional training before
workpiece size/shape.
www.grizzly.com.
This can cause
using.
rotating parts to fly
loose and strike
78 X 51MM
operator with great
EYE/FACE INJURY
force, resulting in
HAZARD!
serious injury or
Always wear
death!
ANSI-approved safety
CHECK OIL
glasses and face shield
when using this
LEVELS BEFORE USING!
machine.
WARNING!
ENTANGLEMENT
HAZARD!
WARNING!
Tie back long hair, roll up
long sleeves, and remove
IMPACT INJURY
loose clothing, jewelry, or
COLOR CODES
HAZARD!
gloves to prevent getting
Remove chuck key
caught in moving parts.
and all adjustment
PANTONE 3005 C or RAL 5005
REFER TO
tools before
PANTONE 711C or RAL 3020
OWNER'S MANUAL
starting lathe.
FOR OIL TYPE AND
PANTONE 7527 C
38 X 124MM
AMOUNT.
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
102 X 102MM
Grizzly will not accept labels changed without approval.
If
Component
artwork changes are required, contact us immediately at manuals@grizzly.com.
Headstock
73 X 154MM
Gearbox
Apron
Coolant
COLOR CODES
WARNING
PANTONE 151 C or RAL 2005
Only trained personnel
CAUTION
PANTONE 109 C
should operate this machine.
If safe operation procedures
are not clearly understood,
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
get additional training before
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
using.
artwork changes are required, contact us immediately at manuals@grizzly.com.
1110
78 X 51MM
COLOR CODES
NOTICE
PANTONE 3005 C or RAL 5005
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
GRIZZLY BEIGE
PANTONE 7527 C
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at manuals@grizzly.com.
1109
grizzly.com
REF PART #
1101 P07821101 STOP OIL FILL TAG
1102 P07821102 MACHINE ID LABEL
1103 P07821103 IMPACT INJURY HAZARD LABEL
1104 P07821104 ELECTRICITY LABEL
1105 P07821105 BIOLOGICAL/POISON HAZARD LABEL
1106 P07821106 DISCONNECT POWER LABEL
1107 P07821107 MODEL NUMBER LABEL
1108 P07821108 GRIZZLY.COM LABEL
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
-110-
Labels & Cosmetics
1102
• Label is actual size
• Label must be made of
oil-resistant material
G0782 Machine Labels B
Specifications
WARNING!
(12/10/14)
Motor: 2 HP, 220V, 1-Ph, 60 Hz
To reduce the risk of serious personal injury while using this machine:
Full-Load Current: 10A
1. Read and understand owner's manual before starting.
Swing Over Bed: 13"
2. Always wear approved safety glasses AND a face shield.
3. Only plug power cord into a grounded outlet.
Swing Over Gap: 18-3/4"
WARNING!
4. Disconnect power before setting up, adjusting, or servicing.
Swing Over Cross Slide: 7-3/4"
5. Avoid getting entangled in rotating parts—tie back long hair, roll up
To reduce risk of death
Distance Between Centers: 40"
or serious injury, read
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
Spindle Type: D1-4 Camlock
manual BEFORE using
6. Rotate workpiece by hand to ensure clearance before starting.
Spindle Taper: MT#5
machine.
7. Test each new workpiece setup for safe rotation; start with slowest
Spindle Bore: 1.57" (40mm)
speed and stand to side of lathe until safe rotation verified.
To get a new manual, call
Tailstock Taper: MT#3
8. Keep all guards and covers in place during operation.
(800) 523-4777 or go to
Cross Slide Travel: 6-1/8"
9. Make sure lathe is properly set up before starting.
www.grizzly.com.
Compound Travel: 2-7/8"
10. Change coolant regularly and avoid contact with skin.
Weight: 1320 lbs.
11. Never leave chuck key in chuck.
12. Never touch rotating chuck or workpiece with hands.
13. DO NOT reverse spindle rotation while spindle is moving.
EYE/FACE INJURY
14. Never leave lathe running unattended.
HAZARD!
Date
15. Properly support long workpieces with an appropriate rest.
Always wear
16. DO NOT operate when tired or under influence of drugs or alcohol.
ANSI-approved safety
17. DO NOT expose to rain or use in wet locations.
glasses and face shield
18. Prevent unauthorized use by children or untrained users; restrict
Serial #
when using this
access or disable machine when unattended.
machine.
164 X 112MM
WARNING!
ENTANGLEMENT
HAZARD!
• Label is actual size
Tie back long hair, roll up
• Label must be made of
long sleeves, and remove
loose clothing, jewelry, or
oil-resistant material
gloves to prevent getting
caught in moving parts.
WARNING!
BIOLOGICAL AND
POISON HAZARD!
Use personal protection
19 X 17MM
when handling coolant.
Immediately clean up
spills.
38 X 63MM
38 X 63MM
73 X 154MM
G0782 Machine Labels B
COLOR CODES
72 X 38MM
WARNING
PANTONE 151 C or RAL 2005
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
COLOR CODES
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WARNING
PANTONE 151 C or RAL 2005
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
If
CAUTION
PANTONE 109 C
artwork changes are required, contact us immediately at manuals@grizzly.com.
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
artwork changes are required, contact us immediately at manuals@grizzly.com.
Fluid Capacities
Capacity
Type
4.2 qt.
Grizzly #T23963 or ISO 32 Equivalent
2.1 qt.
Grizzly #T23962 or ISO 68 Equivalent
1.0 qt.
Grizzly #T23962 or ISO 68 Equivalent
10.0 qt.
Specific to Operation and Material
98 X 34MM
If
grizzly.com
FOR GRIZZLY MACHINES ONLY!
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
G0782
1108
G0782
DESCRIPTION
1103
• Label is actual size
• Label must be made of
oil-resistant material
IMPACT INJURY
HAZARD!
Avoid setting spindle
19 X 17MM
speed too fast for
chuck RPM rating or
workpiece size/shape.
This can cause
rotating parts to fly
1112
loose and strike
operator with great
force, resulting in
serious injury or
death!
WARNING!
IMPACT INJURY
HAZARD!
Remove chuck key
and all adjustment
tools before
starting lathe.
G0782 Machine Labels A
38 X 124MM
(12/10/14)
Fluid Capacities
Component
Capacity
Type
Headstock
4.2 qt.
Grizzly #T23963 or ISO 32 Equivalent
Gearbox
2.1 qt.
Grizzly #T23962 or ISO 68 Equivalent
• Label is actual size
1104
Apron
1.0 qt.
Grizzly #T23962 or ISO 68 Equivalent
• Label must be made of
Specifications
Coolant
10.0 qt.
Specific to Operation and Material
(12/10/14)
oil-resistant material
Motor: 2 HP, 220V, 1-Ph, 60 Hz
To reduce the risk of serious personal injury while using this machine:
98 X 34MM
Full-Load Current: 10A
Swing Over Bed: 13"
Swing Over Gap: 18-3/4"
WARNING!
Swing Over Cross Slide: 7-3/4"
Distance Between Centers: 40"
To reduce risk of death
IMPACT INJURY
Spindle Type: D1-4 Camlock
or serious injury, read
HAZARD!
Spindle Taper: MT#5
manual BEFORE using
Avoid setting spindle
19 X 17MM
machine.
Spindle Bore: 1.57" (40mm)
speed too fast for
Tailstock Taper: MT#3
To get a new manual, call
chuck RPM rating or
Cross Slide Travel: 6-1/8"
(800) 523-4777 or go to
workpiece size/shape.
Compound Travel: 2-7/8"
www.grizzly.com.
This can cause
10. Change coolant regularly and avoid contact with skin.
Weight: 1320 lbs.
11. Never leave chuck key in chuck.
G0782 Machine Labels A
rotating parts to fly
loose and strike
12. Never touch rotating chuck or workpiece with hands.
If
operator with great
13. DO NOT reverse spindle rotation while spindle is moving.
EYE/FACE INJURY
force, resulting in
14. Never leave lathe running unattended.
(12/10/14)
HAZARD!
serious injury or
15. Properly support long workpieces with an appropriate rest.
Date
Always wear
death!
16. DO NOT operate when tired or under influence of drugs or alcohol.
1105
ANSI-approved safety
17. DO NOT expose to rain or use in wet locations.
18. Prevent unauthorized use by children or untrained users; restrict
glasses and face shield
Serial #
when using this
machine.
WARNING!
WARNING!
Specifications
ENTANGLEMENT
Motor: 2 HP, 220V, 1-Ph, 60 Hz
To reduce the risk of serious personal injury while using this machine:
HAZARD!
Full-Load Current: 10A
WARNING!
1. Read and understand owner's manual before starting.
Tie back long hair, roll up
Swing Over Bed: 13"
2. Always wear approved safety glasses AND a face shield.
long sleeves, and remove
IMPACT INJURY
Swing Over Gap: 18-3/4"
3. Only plug power cord into a grounded outlet.
loose clothing, jewelry, or
HAZARD!
4. Disconnect power before setting up, adjusting, or servicing.
Swing Over Cross Slide: 7-3/4"
gloves to prevent getting
5. Avoid getting entangled in rotating parts—tie back long hair, roll up
Distance Between Centers: 40"
Remove chuck key
caught in moving parts.
and all adjustment
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
Spindle Type: D1-4 Camlock
6. Rotate workpiece by hand to ensure clearance before starting.
tools before
Spindle Taper: MT#5
WARNING!
starting lathe.
7. Test each new workpiece setup for safe rotation; start with slowest
Spindle Bore: 1.57" (40mm)
speed and stand to side of lathe until safe rotation verified.
Tailstock Taper: MT#3
BIOLOGICAL AND
8. Keep all guards and covers in place during operation.
Cross Slide Travel: 6-1/8"
38 X 124MM
POISON HAZARD!
9. Make sure lathe is properly set up before starting.
Compound Travel: 2-7/8"
Use personal protection
10. Change coolant regularly and avoid contact with skin.
Weight: 1320 lbs.
when handling coolant.
11. Never leave chuck key in chuck.
Immediately clean up
12. Never touch rotating chuck or workpiece with hands.
spills.
Fluid Capacities
13. DO NOT reverse spindle rotation while spindle is moving.
14. Never leave lathe running unattended.
Component
Capacity
Type
38 X 63MM
Date
15. Properly support long workpieces with an appropriate rest.
Headstock
4.2 qt.
Grizzly #T23963 or ISO 32 Equivalent
16. DO NOT operate when tired or under influence of drugs or alcohol.
73 X 154MM
17. DO NOT expose to rain or use in wet locations.
1106
Gearbox
2.1 qt.
Grizzly #T23962 or ISO 68 Equivalent
18. Prevent unauthorized use by children or untrained users; restrict
Serial #
Apron
1.0 qt.
Grizzly #T23962 or ISO 68 Equivalent
access or disable machine when unattended.
Coolant
10.0 qt.
Specific to Operation and Material
164 X 112MM
GRIZZLY LOGO RED
98 X 34MM
COLOR CODES
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
WARNING
PANTONE 151 C or RAL 2005
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
artwork changes are required, contact us immediately at manuals@grizzly.com.
CAUTION
PANTONE 109 C
WARNING!
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
BIOLOGICAL AND
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
POISON HAZARD!
If
artwork changes are required, contact us immediately at manuals@grizzly.com.
Use personal protection
when handling coolant.
Immediately clean up
spills.
38 X 63MM
38 X 63MM
COLOR CODES
WARNING
PANTONE 151 C or RAL 2005
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
artwork changes are required, contact us immediately at manuals@grizzly.com.
1107
REF PART #
1109 P07821109 GRIZZLY NAMEPLATE
1110 P07821110 TRAINED PERSONNEL NOTICE
1111 P07821111 WARNING/HAZARD LABEL
1112 P07821112 GRIZZLY BEIGE TOUCH-UP PAINT
1113 P07821113 FLUID CAPACITY LABEL
1114 P07821114 PINCH/ENTANGLEMENT HAZARD LABEL
1115 P07821115 GRIZZLY GREEN TOUCH-UP PAINT
rotating parts to fly
loose and strike
operator with great
EYE/FACE INJURY
force, resulting in
HAZARD!
serious injury or
Always wear
death!
ANSI-approved safety
glasses and face shield
when using this
machine.
WARNING!
ENTANGLEMENT
HAZARD!
WARNING!
Tie back long hair, roll up
long sleeves, and remove
IMPACT INJURY
loose clothing, jewelry, or
HAZARD!
gloves to prevent getting
Remove chuck key
caught in moving parts.
and all adjustment
1113
tools before
starting lathe.
38 X 124MM
Fluid Capacities
Component
Capacity
Type
Headstock
4.2 qt.
Grizzly #T23963 or ISO 32 Equivalent
73 X 154MM
Gearbox
2.1 qt.
Grizzly #T23962 or ISO 68 Equivalent
Apron
1.0 qt.
Grizzly #T23962 or ISO 68 Equivalent
Coolant
10.0 qt.
Specific to Operation and Material
98 X 34MM
COLOR CODES
G0782 Machine Labels B
WARNING
PANTONE 151 C or RAL 2005
(12/10/14)
CAUTION
PANTONE 109 C
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
WARNING!
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
To reduce risk of death
IMPACT INJURY
artwork changes are required, contact us immediately at manuals@grizzly.com.
or serious injury, read
HAZARD!
manual BEFORE using
Avoid setting spindle
machine.
speed too fast for
To get a new manual, call
chuck RPM rating or
(800) 523-4777 or go to
workpiece size/shape.
• Label is actual size
www.grizzly.com.
This can cause
rotating parts to fly
• Label must be made of
loose and strike
operator with great
oil-resistant material
EYE/FACE INJURY
force, resulting in
HAZARD!
serious injury or
Always wear
death!
ANSI-approved safety
glasses and face shield
when using this
machine.
WARNING!
WARNING!
ENTANGLEMENT
HAZARD!
1. Read and understand owner's manual before starting.
WARNING!
Tie back long hair, roll up
2. Always wear approved safety glasses AND a face shield.
long sleeves, and remove
IMPACT INJURY
3. Only plug power cord into a grounded outlet.
loose clothing, jewelry, or
HAZARD!
4. Disconnect power before setting up, adjusting, or servicing.
gloves to prevent getting
Remove chuck key
5. Avoid getting entangled in rotating parts—tie back long hair, roll up
caught in moving parts.
and all adjustment
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
tools before
6. Rotate workpiece by hand to ensure clearance before starting.
starting lathe.
7. Test each new workpiece setup for safe rotation; start with slowest
speed and stand to side of lathe until safe rotation verified.
38 X 124MM
8. Keep all guards and covers in place during operation.
9. Make sure lathe is properly set up before starting.
• Label is actual size
Component
• Label must be made of
Headstock
73 X 154MM
oil-resistant material
Gearbox
Apron
Coolant
access or disable machine when unattended.
COLOR CODES
164 X 112MM
WARNING
PANTONE 151 C or RAL 2005
CAUTION
PANTONE 109 C
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
artwork changes are required, contact us immediately at manuals@grizzly.com.
G0782 Machine Labels A
38 X 63MM
COLOR CODES
72 X 38MM
Motor: 2 HP, 220V, 1-Ph, 60 Hz
WARNING
PANTONE 151 C or RAL 2005
Full-Load Current: 10A
Swing Over Bed: 13"
PANTONE 711C or RAL 3020
Swing Over Gap: 18-3/4"
Swing Over Cross Slide: 7-3/4"
Distance Between Centers: 40"
Spindle Type: D1-4 Camlock
Spindle Taper: MT#5
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
Spindle Bore: 1.57" (40mm)
Tailstock Taper: MT#3
If
Cross Slide Travel: 6-1/8"
Compound Travel: 2-7/8"
Weight: 1320 lbs.
72 X 38MM
1115
WARNING!
BIOLOGICAL AND
POISON HAZARD!
Use personal protection
when handling coolant.
If
Immediately clean up
spills.
38 X 63MM
FOR GRIZZLY MACHINES ONLY!
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
DESCRIPTION
Model G0782 (Mfd. Since 10/15)
1114
PINCH
1104
ENTANGLEMENT
• Label is actual size
HAZARD!
• Label must be made of
Disconnect power
before opening door.
oil-resistant material
Stay clear of rotating
outboard spindle.
If
19 X 17MM
G0782 Machine Labels B
• Label is actual size
• Label must be made of
(12/10/14)
oil-resistant material
WARNING!
To reduce risk of death
Fluid Capacities
IMPACT INJURY
or serious injury, read
HAZARD!
manual BEFORE using
1104
Capacity
Type
Avoid setting spindle
machine.
19 X 17MM
4.2 qt.
Grizzly #T23963 or ISO 32 Equivalent
speed too fast for
To get a new manual, call
chuck RPM rating or
2.1 qt.
Grizzly #T23962 or ISO 68 Equivalent
(800) 523-4777 or go to
workpiece size/shape.
1.0 qt.
Grizzly #T23962 or ISO 68 Equivalent
www.grizzly.com.
This can cause
10.0 qt.
Specific to Operation and Material
rotating parts to fly
loose and strike
operator with great
98 X 34MM
EYE/FACE INJURY
force, resulting in
HAZARD!
serious injury or
Always wear
death!
ANSI-approved safety
glasses and face shield
when using this
machine.
WARNING!
ENTANGLEMENT
HAZARD!
WARNING!
If
Tie back long hair, roll up
long sleeves, and remove
G0782 Machine Labels A
IMPACT INJURY
loose clothing, jewelry, or
HAZARD!
gloves to prevent getting
Remove chuck key
caught in moving parts.
• Label is actual size
and all adjustment
(12/10/14)
tools before
• Label must be made of
starting lathe.
(12/10/14)
oil-resistant material
38 X 124MM
Specifications
WARNING!
Fluid Capacities
Motor: 2 HP, 220V, 1-Ph, 60 Hz
To reduce the risk of serious personal injury while using this machine:
Component
Capacity
Type
Specifications
WARNING!
Full-Load Current: 10A
1. Read and understand owner's manual before starting.
Headstock
4.2 qt.
Grizzly #T23963 or ISO 32 Equivalent
2. Always wear approved safety glasses AND a face shield.
73 X 154MM
Swing Over Bed: 13"
To reduce the risk of serious personal injury while using this machine:
Gearbox
2.1 qt.
Grizzly #T23962 or ISO 68 Equivalent
3. Only plug power cord into a grounded outlet.
Swing Over Gap: 18-3/4"
1. Read and understand owner's manual before starting.
4. Disconnect power before setting up, adjusting, or servicing.
Swing Over Cross Slide: 7-3/4"
Apron
1.0 qt.
Grizzly #T23962 or ISO 68 Equivalent
2. Always wear approved safety glasses AND a face shield.
5. Avoid getting entangled in rotating parts—tie back long hair, roll up
Distance Between Centers: 40"
Coolant
10.0 qt.
Specific to Operation and Material
3. Only plug power cord into a grounded outlet.
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
Spindle Type: D1-4 Camlock
4. Disconnect power before setting up, adjusting, or servicing.
6. Rotate workpiece by hand to ensure clearance before starting.
Spindle Taper: MT#5
5. Avoid getting entangled in rotating parts—tie back long hair, roll up
98 X 34MM
7. Test each new workpiece setup for safe rotation; start with slowest
Spindle Bore: 1.57" (40mm)
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
speed and stand to side of lathe until safe rotation verified.
6. Rotate workpiece by hand to ensure clearance before starting.
Tailstock Taper: MT#3
COLOR CODES
8. Keep all guards and covers in place during operation.
7. Test each new workpiece setup for safe rotation; start with slowest
Cross Slide Travel: 6-1/8"
9. Make sure lathe is properly set up before starting.
speed and stand to side of lathe until safe rotation verified.
Compound Travel: 2-7/8"
10. Change coolant regularly and avoid contact with skin.
8. Keep all guards and covers in place during operation.
WARNING
PANTONE 151 C or RAL 2005
Weight: 1320 lbs.
11. Never leave chuck key in chuck.
9. Make sure lathe is properly set up before starting.
12. Never touch rotating chuck or workpiece with hands.
10. Change coolant regularly and avoid contact with skin.
CAUTION
PANTONE 109 C
13. DO NOT reverse spindle rotation while spindle is moving.
11. Never leave chuck key in chuck.
14. Never leave lathe running unattended.
12. Never touch rotating chuck or workpiece with hands.
15. Properly support long workpieces with an appropriate rest.
Date
13. DO NOT reverse spindle rotation while spindle is moving.
16. DO NOT operate when tired or under influence of drugs or alcohol.
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
14. Never leave lathe running unattended.
17. DO NOT expose to rain or use in wet locations.
FOR GRIZZLY MACHINES ONLY!
15. Properly support long workpieces with an appropriate rest.
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
Date
18. Prevent unauthorized use by children or untrained users; restrict
Serial #
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
16. DO NOT operate when tired or under influence of drugs or alcohol.
If
access or disable machine when unattended.
17. DO NOT expose to rain or use in wet locations.
artwork changes are required, contact us immediately at manuals@grizzly.com.
18. Prevent unauthorized use by children or untrained users; restrict
Serial #
access or disable machine when unattended.
164 X 112MM
164 X 112MM
WARNING!
BIOLOGICAL AND
POISON HAZARD!
Use personal protection
when handling coolant.
Immediately clean up
spills.
1106
38 X 63MM
38 X 63MM
1106
COLOR CODES
38 X 63MM
COLOR CODES
WARNING
PANTONE 151 C or RAL 2005
72 X 38MM
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
WARNING
PANTONE 151 C or RAL 2005
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
artwork changes are required, contact us immediately at
If
artwork changes are required, contact us immediately at manuals@grizzly.com.
Advertisement
Table of Contents
