User Manual
1.12.3 Power up from Standby Mode
When powered-up from standby mode the instrument always opens
the last screen shown before going into standby mode.
1.13
NAVIGATION
On power up the DPI612 displays the Dashboard. The user should
select the desired option by touching the appropriate icon. Function
screens are navigated by swiping a finger from right to left while
touching the screen. List menus are navigated by swiping a finger
up and down while touching the screen.
1.13.1 Set Date, Time and Language
To access Date, Time and Language menus
Select:
DASHBOARD >>
Note: The DPI612 will maintain the date and time for 30 days after
being left without batteries. In case of loss of date and time, replace
the batteries, connect the mains adaptor to the DPI612 and keep it
turned on for 50 hours to fully recharge the clock battery.
Page 32 of 105
Figure 1-18 Dash Board
SETTINGS >> DATE
[EN] English – 109M4017 Revision -
Druck DPI612