Table of Contents
Advertisement
User Manual
2.6.1
IDOS Option Assembly Instructions
Step
2.6.2
IDOS Function Procedures
The procedures for an IDOS module are the same as for the internal
pressure sensor.
Enable the IDOS module from the TASK menu:
•
IDOS function (Measure or Differential)
•
If necessary, change the Units for the function
•
If necessary, set a Utility for the function:
Page 73 of 105
Figure 2-28 IDOS Module
Table 2-6
Procedure
1
Attach one end of the adaptor IO620-IDOS-USB to
the IDOS module
2
Push the Type A end of USB Cable into the USB socket
on the instrument and the type B end into the
adaptor (IO620-IDOS-USB)
3
Set the instrument power on
When this symbol flashes at the top of the display, it
shows there is communication between the IDOS
module and the calibrator
I.
Max/Min/Avg
II.
Switch Test
[EN] English – 109M4017 Revision -
Druck DPI612
Advertisement
Table of Contents
