GE Druck DPI612 User Manual page 13

Portable pressure calibrator
Hide thumbs Also See for Druck DPI612:
Table of Contents

Advertisement

User Manual
Remove the battery from the equipment when not in use.
Do not remove the battery from its original packaging until
required for use.
Secondary batteries need to be charged before use. Always use
the correct charger and refer to the user manual for proper
charging instructions.
Do not leave a battery on prolonged charge when not in use.
After extended periods of storage, it may be necessary to charge
and discharge the battery several times to obtain maximum
performance.
Do not subject the battery pack to intense sunlight or hot
temperatures, for example in a car during hot weather. Otherwise,
electrolyte leakage, overheating and/or smoke emission can occur.
Also, its guaranteed performance will be lost and/or its service life
will be shortened.
The battery pack incorporates built-in safety devices. Do not use it
in a location where static electricity is present.
The guaranteed recharging temperature range is 0°C to +45ºC. A
recharging operation outside this temperature range can lead to
electrolyte leakage and/or overheating of the battery pack and
may cause damage to it.
In the event of a cell leaking, do not allow the liquid to come in
contact with the skin or eyes. If contact has been made, wash the
affected area with copious amounts of water and seek medical
advice.
Seek medical advice immediately if material or content from a
battery has been swallowed
Keep the battery out of the reach of children.
Keep batteries clean and dry.
Page 13 of 105
[EN] English – 109M4017 Revision -
Druck DPI612

Advertisement

Table of Contents
loading

Table of Contents