Table of Contents
Advertisement
User Manual
DPI 612 pFlexPro (100 bar) Volume Adjuster
Figure 1-11
100 bar
Volume
Adjuster
DPI 612 hFlexPro (1000 bar) Volume Adjuster
Figure 1-12
1000 bar
Volume
Adjuster
Page 24 of 105
This control increases or decreases the pressure/vacuum.
Before you seal the system (See Section 1.9.3), turn this
control to the necessary position:
•
For equal adjustment, turn it to the middle of
its range.
•
For maximum adjustment, turn it fully
clockwise or counter clockwise.
When you have set the necessary pressure or vacuum
with the pump (See Section 1.9.5), use the volume adjuster
to make the fine adjustments.
This control increases or decreases the pressure/vacuum.
Before you seal the system (See Section 1.9.3), turn this
control to the necessary position:
•
For equal adjustment, turn it to the middle of
its range.
•
For maximum adjustment, turn it fully
clockwise or counter clockwise.
When you have set the necessary pressure or vacuum
with the pump (See Section 1.9.5), use the volume adjuster
to make the fine adjustments.
[EN] English – 109M4017 Revision -
Druck DPI612
Advertisement
Table of Contents
