Table of Contents
Advertisement
User Manual
III.
•
DIRECTION selects
function.
•
FUNCTION selects the function required.
(E.g.: Current or Voltage). For more options, scroll down the menu
by swiping the display from bottom to top.
•
UNITS selects the type of unit required, (E.g.: Volts, Amps), please
note that there may only be 1 type of unit available in particular
Functions.
•
UTILITY selects the required utility (See Section 2.4.2 for details).
•
CAPTION allows the user to change the caption, if required.
•
CAPTION RESET allows the user to reset the caption.
•
Once all settings have been selected, press the
bottom of the screen to return to the TASK SETTINGS screen.
•
Please note for the settings to be set the user must also press the
button in the TASK SETTINGS menu.
•
Repeat the above if another channel is required.
Page 59 of 105
Figure 2-13 Channel Settings Menu
Setup a channel for measurement
Source or
measure for the selected
[EN] English – 109M4017 Revision -
Druck DPI612
button at the
Advertisement
Table of Contents
