Table of Contents
Advertisement
User Manual
Figure 2-23 Source current with external loop power. (Range: 0 to 24 mA)
d. Example Procedure: Switch Test
Switch Test is only valid when a Pressure Function is selected.
Switch operation
When setting the Switch Test, the software automatically sets the
electrical channel to the switch test function.
Note: If there is an electrical function already selected it will
automatically be disabled. The display will show a screen message.
Page 67 of 105
1. Set the applicable software options.
2. Complete the electrical connections and continue with
the measure or source operation.
3. Source only (Automation): Set the applicable output
value.
[EN] English – 109M4017 Revision -
Druck DPI612
Advertisement
Table of Contents
