User Manual
Figure 2-20 Measure current on CH1. Range ±55 mA
b. Example Procedure: Measure Voltage
•
Page 65 of 105
1. Set the applicable software options.
2. Complete the electrical connections and continue with
the measure or source operation.
3. Source only (Automation). Set the applicable output
value.
Figure 2-21 shows CH1 set-up to measure a DC voltage
(±30 V) or DC mV (±2000 mV).
Figure 2-21 Measure DC Volts or DC mV on CH1.
[EN] English – 109M4017 Revision -
Druck DPI612