Table of Contents
Advertisement
User Manual
•
TRIGGER
Select one of the following:
•
PERIOD
This option is used to set the time interval for periodic data
logging.
To start Data Logging Mode:
1. Select appropriate options and enter filename for Data Log file.
Note: When entering filename it is first necessary to select
destination (INTERNAL or USB FLASH DRIVE)
2. Select the
3.2
OPERATION
In periodic mode, to begin data logging tap 'Start logging'
button.
In Key press mode, a data point is taken every time the user taps the
log button
To stop Data Logging select
The data logging indicator
reading is logged.
Page 77 of 105
a. Key Press (logs one data point each time the button is
pressed).
b. Periodic (logs one data point at a set time interval).
button.
flashes to indicate whenever a
[EN] English – 109M4017 Revision -
Druck DPI612
Advertisement
Table of Contents
