Set-Up; Define The Reference Channel; Define Each Input Channel - GE Druck DPI612 User Manual

User Manual
4.2

SET-UP

1. Set the Druck DPI612 channels in the Calibrator function. (See
Section 2.2.1).
2. Connect the calibrator to the device under test.
3. Enter the Documenting function.
4. Tap the ANALYSIS button.
4.2.1

Define the Reference Channel

1. Tap the channel button that is to be used as the Reference
channel for the analysis.
2. Set the channel type to Reference.
3. All other channel settings for that channel are cancelled. All other
active channels are set to Input.
4.2.2

Define each Input Channel

Tap each Input channel button to set the Input options.
Page 82 of 105
DASHBOARD >>
Figure 4-1 Select Reference Channel
DOCUMENTING
[EN] English – 109M4017 Revision -
Druck DPI612