Sccp Mode Parameter; Usemgcp; Other Parameters; Operating Parameters - Cisco ATA 188 Administrator's Manual

SCCP Mode Parameter

SCCP Mode Parameter

This parameter (UseMGCP) is located in the yellow portion of the Cisco ATA web configuration page.
The other parameters in this portion of the screen are not for SCCP.

UseMGCP

Description
Set this parameter to 0 if you are using the Cisco ATA as an SCCP client. (Set this parameter to 1 if you
are using the Cisco ATA as an MGCP client.)
Value Type
Boolean
Range
0 or 1
Default
0
Voice Configuration Menu Access Code
38

Other Parameters

This remaining parameters in the yellow portion of the configuration screen are not used for SCCP:
•
•
•
•
•
•
•

Operating Parameters

The parameters described in this section include parameters for configuring codecs, fax features and
VLAN settings:
•
•
•
•
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SCCP)
5-10
CA0UID
CA1UID
MGCPVer
RetxIntv
RetxLim
MGCPPort
CodecName
LBRCodec, page 5-11
PrfCodec, page 5-12
AudioMode, page 5-12
ConnectMode, page 5-13
Chapter 5 Parameters and Defaults
Ol-3141-01