Steps Needed To Configure The Cisco Ata; Basic Configuration Steps In A Cisco Callmanager Tftp Server Environment - Cisco ATA 188 Administrator's Manual

Steps Needed to Configure the Cisco ATA

Steps Needed to Configure the Cisco ATA
This section contains the following topics:
•
•

Basic Configuration Steps in a Cisco CallManager TFTP Server Environment

Table 3-3
SCCP environment, which includes a Cisco CallManager TFTP server.
Table 3-3 Basic Steps to Configure the Cisco ATA in a Typical Cisco CallManager Environment
Action
Download the desired Cisco ATA release software zip file from the
1.
Cisco web site and store it on the Cisco CallManager TFTP server.
Create a default configuration file that can be used by many
2.
Cisco ATAs in your Cisco CallManager environment.
You can skip this step if the Cisco ATA default parameters do not
Note
require re-configuration in your network environment.
Configure the method with which the Cisco ATA will locate the
3.
Cisco CallManager TFTP server at boot up time.
Add the Cisco ATA to the Cisco CallManager.
4.
Power up the Cisco ATA.
5.
Optionally, create a configuration file for a specific Cisco ATA.
6.
If you make configuration changes to the Cisco ATA, you must reset
7.
the Cisco ATA by using the Cisco CallManager administration web
pages.
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SCCP)
3-6
Basic Configuration Steps in a Cisco CallManager TFTP Server Environment, page 3-6
Basic Configuration Steps in a Non-TFTP Server Environment, page 3-7
shows the basic steps for configuring the Cisco ATA and making it operational in a typical
Chapter 3 Configuring the Cisco ATA for SCCP
Reference
Setting Up the TFTP Server with Cisco ATA
Software, page 3-8
Creating a Cisco ATA Default Configuration File,
page 3-10
Configuring the Cisco ATA to Obtain its
Configuration File from the TFTP Server, page
3-15
Chapter 4, "Adding the Cisco ATA to the
Cisco CallManager"
Creating a Configuration File for a Specific
Cisco ATA, page 3-12
Resetting the Cisco ATA Using
Cisco CallManager, page 3-23
OL-3141-01