Basic Configuration Steps In A Non-Tftp Server Environment; Configuring The Cisco Ata Using A Tftp Server - Cisco ATA 188 Administrator's Manual

Chapter 3 Configuring the Cisco ATA for SCCP

Basic Configuration Steps in a Non-TFTP Server Environment

Table 3-4
Table 3-4 Basic Steps to Configure the Cisco ATA Without Using the TFTP Server Method
Action
Download the desired Cisco ATA release software zip file from the Cisco web site:
1.
a. If you are a registered CCO user. go to the following URL:
http://www.cisco.com/cgi-bin/tablebuild.pl/ata186
b. Download the zip file that contains the software for the applicable release and signaling
image you are using. The contents of each file are described next to the file name.
Extract the files to the desired location on your PC.
c.
Note The file that contains the protocol signaling image has an extension of .zup.
Manually upgrade the Cisco ATA to the correct signaling image.
2.
Configure the Cisco ATA by using either one of the manual-configuration methods.
3.
Manually configure the CA0orCM0 parameter to instruct the Cisco ATA about how to
4.
register with Cisco CallManager.
Power up the Cisco ATA.
5.

Configuring the Cisco ATA Using a TFTP Server

The TFTP method of configuration is useful when you have many Cisco ATA because you can use a
TFTP server for remote, batch configuration of Cisco ATAs. A TFTP server can host one unique
configuration file for each Cisco ATA.
This section contains the following topics:
•
•
•
•
•
•
OL-3141-01
shows the basic steps for configuring the Cisco ATA without using the TFTP server method.
Setting Up the TFTP Server with Cisco ATA Software, page 3-8
Configurable Features and Related Parameters, page 3-8
Parameters Not Used for SCCP, page 3-10
Creating a Cisco ATA Default Configuration File, page 3-10
Creating a Configuration File for a Specific Cisco ATA, page 3-12
Configuring the Cisco ATA to Obtain its Configuration File from the TFTP Server, page 3-15
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SCCP)
Configuring the Cisco ATA Using a TFTP Server
Reference
Upgrading the Signaling
Image Manually, page 7-4
Voice Configuration
•
Menu, page 3-18
Cisco ATA Web
•
Configuration Page,
page 3-21
CA0orCM0 and
CA1orCM1, page 5-9
3-7