Using The Voice Configuration Menu - Cisco ATA 188 Administrator's Manual

Chapter 7 Upgrading the Cisco ATA Signaling Image

Using the Voice Configuration Menu

To use the voice configuration menu to verify a successful image upgrade, perform the following steps:
Procedure
Step 1 Pick up the telephone handset attached to the Phone1 port of the Cisco ATA.
Step 2 Press the function button on the Cisco ATA.
Press 123# on the telephone keypad to play out the image version number.
Step 3
Press 123123# on the telephone keypad to play out the image build date.
OL-3141-01
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SCCP)
Confirming a Successful Signaling Image Upgrade
7-7