Staticnetmask; Account Information Parameters; Epid0Orsid0 And Epid1Orsid1 - Cisco ATA 188 Administrator's Manual

Account Information Parameters

StaticNetMask

Description
Configure the statically assigned subnet mask using this parameter if the DHCP parameter is set to 0.
Value Type
IP address
Default
255.255.255.0
Voice Configuration Menu Access Code
10
Related Parameters
•
•
•

Account Information Parameters

This section describes the following identification parameters:
•
•

EPID0orSID0 and EPID1orSID1

SIDx specifies whether to enable the Phone 1 and/or Phone 2 ports on the Cisco ATA to register with
Cisco Call Manager. (EPIDx is not for SCCP.) SIDx can be one of the following values:
•
•
•
•
Value Types
Alphanumeric string for each parameter
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SCCP)
5-8
DHCP, page 5-6
StaticIp, page 5-7
StaticRoute, page 5-7
EPID0orSID0 and EPID1orSID1, page 5-8
CA0orCM0 and CA1orCM1, page 5-9
0—Disables port; port does not attempt to register with Cisco CallManager
. or <mac_address>—Uses the default Skinny ID, which is the Cisco ATA MAC address (MAC) for
the Phone 1 port and MAC[1-5]+01 for the Phone 2 port. The port attempts to register with
Cisco CallManager.
For example, if the MAC address of the Cisco ATA is 0001.2D01.073D, then SID0 is
0001.2D01.073D and SID1 is 012D.0107.3D01.
Other values are reserved.
Chapter 5 Parameters and Defaults
Ol-3141-01