Parameters For Configuration Method And Encryption; Usetftp; Tftpurl - Cisco ATA 188 Administrator's Manual

Parameters for Configuration Method and Encryption

Parameters for Configuration Method and Encryption

This section describes parameters for instructing the Cisco ATA how to locate its TFTP server and how
to encrypt its configuration file. These parameters are:
•
•
•

UseTFTP

Settings
1—Use the TFTP server for Cisco ATA configuration.
0—Do not use the TFTP server for Cisco ATA configuration.
Value Type
Boolean
Range
0 or 1
Default
1
Voice Configuration Menu Access Code
305
Related Parameters
•
•
•

TftpURL

Description
Use this parameter to specify the IP address or URL of the TFTP server. This string is needed if the DHCP
server does not provide the TFTP server IP address. When the TftpURL parameter is set to a non-zero value,
this parameter has priority over the TFTP server IP address supplied by the DHCP server.
Optionally, you can include the path prefix to the TFTP file to download.
For example, if the TFTP server IP address is 192.168.2.170 or www.cisco.com, and the path to
download the TFTP file is in /ata186, you can specify the URL as 192.168.2.170/ata186 or
www.cisco.com/ata186.
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SCCP)
5-4
UseTFTP, page 5-4
TftpURL, page 5-4
EncryptKey, page 5-5
TftpURL, page 5-4
EncryptKey, page 5-5
OpFlags, page 5-17 (bits 0 and 3)
Chapter 5 Parameters and Defaults
Ol-3141-01