Network Parameters
Voice Configuration Menu Access Code
320
Related Parameters
•
•
Network Parameters
This section describes the parameters for enabling or disabling the use of a DHCP server to obtain IP
address information, and parameters that you need to statically configure if you disable DHCP:
•
•
•
•
DHCP
Description
A DHCP server can be used to automatically set the Cisco ATA IP address, the network route IP address,
the subnet mask, DNS, NTP, TFTP, and other parameters.
•
•
Value Type
Boolean
Range
0 or 1
Default
1
Voice Configuration Menu Access Code
20
Related Parameters
•
•
•
•
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SCCP)
5-6
UseTFTP, page 5-4
TftpURL, page 5-4
DHCP, page 5-6
StaticIp, page 5-7
StaticRoute, page 5-7
StaticNetMask, page 5-8
1—Enable DHCP
0—Disable DHCP
StaticIp, page 5-7
StaticRoute, page 5-7
StaticNetMask, page 5-8
OpFlags, page 5-17
(bits 3 and 11)
Chapter 5
Parameters and Defaults
Ol-3141-01