Traceflags; Mediaport - Cisco ATA 188 Administrator's Manual
Analog telephone adaptor
Hide thumbs
Also See for ATA 188:
- Administrator's manual (274 pages) ,
- Configuration (28 pages) ,
- Overview (11 pages)
Table of Contents
Advertisement
Chapter 5
Parameters and Defaults
TraceFlags
Description
This parameter is for diagnostic use. Bit values are as follows:
•
•
•
Value Type
Bitmap
Default
0x00000000
Voice Configuration Menu Access Code
313
Related Parameters
NPrintf, page 5-26
MediaPort
Description
Use this parameter to specify the base port where the Cisco ATA transmits and receives RTP media. This
parameter must be an even number. Each connection uses the next available even-numbered port for
RTP.
Value Type
Integer
Range
1 to 65535
Default
16384
Voice Configuration Menu Access Code
202
Related Parameters
•
•
Ol-3141-01
Bits 0 to 6—Reserved
Bit 7—SCCP message log (set to 0 for a simplified log; set to 1 for a detailed log).
Bits 8 to 31—Reserved
UDPTOS, page 5-17
VLANSetting, page 5-18
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SCCP)
Optional Feature Parameters
5-27
Advertisement
Table of Contents
