Adding Cisco Atas Manually - Cisco ATA 188 Administrator's Manual

Adding Cisco ATAs Manually

Adding Cisco ATAs Manually
Use the following procedure to add Cisco ATAs manually using the Cisco CallManager Administration
application.
Tip To get help using the Cisco CallManager application, access context-sensitive help by choosing Help >
For this page from the main menu bar.
Procedure
Log in to the Cisco CallManager Administration application.
Step 1
From the menu bar, select System > Cisco CallManager. The Cisco CallManager Configuration screen
appears.
In the Cisco CallManager Configuration screen, perform the following steps:
Step 2
a.
b.
c.
d.
From the Cisco CallManager Administration menu bar, select Device > Phone to display the Find and
Step 3
List Phones screen.
Click the Add a New Phone link to display the Add a New Phone screen.
Step 4
From the Phone Type drop-down list, make your selection as follows:
Step 5
a.
b.
Click Next. The Phone Configuration screen appears.
Step 6
In the Phone Configuration screen, you must enter information in the following fields:
Step 7
•
•
•
Click the Insert button (called the Update button in Cisco CallManager version 3.2).
Step 8
The Cisco CallManager Administration application should inform you that the device has been added to
the database. You are also asked if you want to assign a directory number for the Phone 1 port at this
time.
Click OK.
In the Directory Number field, assign a directory number to the Cisco ATA.
Step 9
From the Partition drop-down list, you can select a partition for the Cisco ATA or you can keep the
Step 10
default value of None.
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SCCP)
4-2
From the list of Cisco CallManagers click the IP address or name of the Cisco CallManager to
configure.
Enter identical Starting Directory Number and Ending Directory Number values in the fields
provided.
Make sure that the setting called Auto-registration Disabled on this Cisco CallManager is
checked.
Click the Update button.
If you are using Cisco CallManager version 3.0 or 3.1, select Cisco 7960.
If you are using Cisco CallManager version 3.2, select Cisco ATA 186.
MAC Address —Enter the MAC address of the Cisco ATA.
Device Pool—Select either the Default value or a configured device pool from the drop-down list.
Phone Button Template—From the drop-down list, select Standard 7960 if you are using
Cisco CallManager version 3.0 or 3.1; select Standard ATA 186 if you are using
Cisco CallManager version 3.2
Chapter 4 Adding the Cisco ATA to the Cisco CallManager
Ol-3141-01