Chapter 3 Basic Configuration Using The Command-Line Interface - Cisco AS5350 - Universal Access Server Configuration Manual

Universal gateway software configuration guide
Hide thumbs Also See for AS5350 - Universal Access Server:
Table of Contents

Advertisement

Where to Go Next
Where to Go Next
At this point you should go to:
The following publications are available on the Documentation CD-ROM that shipped with your
Tip
gateway, or on the World Wide Web from the Cisco home page.
Cisco AS5350 and Cisco AS5400 Universal Gateway Software Configuration Guide
2-10
Chapter 3, "Basic Configuration Using the Command-Line Interface"
Cisco AS5350 or Cisco AS5400 universal gateway.
For additional basic configuration information, refer to Cisco IOS Dial Technologies Configuration
Guide and Cisco IOS Dial Technologies Command Reference, available online at
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/index.htm. For more
advanced configuration topics, refer to the Cisco IOS software configuration guide, feature
modules, and command reference publications that pertain to your Cisco IOS software release.
Check Configuring Selected 12.1 Cisco IOS Software Features, available online at
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_serv/as5400/index.htm
For troubleshooting information, refer to the System Error Messages and Debug Command
Reference publications.
Chapter 2
Verifying Basic Setup
to commission your
OL-3418-02 B0

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

As5400

Table of Contents