GE C70 Instruction Manual page 60

3.1 DESCRIPTION
3
Figure 3–3: C70 HORIZONTAL MOUNTING AND DIMENSIONS (STANDARD PANEL)
b) VERTICAL UNITS
The C70 Capacitor Bank Protection and Control System is available as a reduced size (¾) vertical mount unit, with a
removable faceplate. The faceplate can be specified as either standard or enhanced at the time of ordering. The enhanced
faceplate contains additional user-programmable pushbuttons and LED indicators.
The modular design allows the relay to be easily upgraded or repaired by a qualified service person. The faceplate is
hinged to allow easy access to the removable modules, and is itself removable to allow mounting on doors with limited rear
depth.
The case dimensions are shown below, along with panel cutout details for panel mounting. When planning the location of
your panel cutout, ensure that provision is made for the faceplate to swing open without interference to or from adjacent
equipment.
3-2
18.370"
[466,60 mm]
CUT-OUT
17.750"
[450,85 mm]
Figure 3–2: C70 HORIZONTAL MOUNTING (ENHANCED PANEL)
C70 Capacitor Bank Protection and Control System
3 HARDWARE
0.280"
[7,11 mm]
Typ. x 4
4.000"
[101,60 mm]
842808A1.CDR
GE Multilin