Environmental - GE C70 Instruction Manual

2 PRODUCT DESCRIPTION
TYPICAL LINK DISTANCE
EMITTER TYPE CABLE
TYPE
820 nm LED, 62.5/125 μm
multimode
1300 nm LED, 62.5/125 μm
multimode
Typical distances listed are based on the follow-
ing assumptions for system loss. As actual losses
vary from one installation to another, the distance
NOTE
covered by your system may vary.
CONNECTOR LOSSES (TOTAL OF BOTH ENDS)
ST connector 2 dB
FIBER LOSSES
820 nm multimode 3 dB/km
1300 nm multimode 1 dB/km
1300 nm singlemode 0.35 dB/km
Splice losses: One splice every 2 km,
at 0.05 dB loss per splice.
SYSTEM MARGIN
3 dB additional loss added to calculations to compensate for
all other losses.
Compensated difference in transmitting and receiving (channel
asymmetry) channel delays using GPS satellite clock: 10 ms
AMBIENT TEMPERATURES
Storage temperature: –40 to 85°C
Operating temperature: –40 to 60°C; the LCD contrast can be
impaired at temperatures less than –
20°C
HUMIDITY
Humidity: operating up to 95% (non-condensing) at
55°C (as per IEC60068-2-30 variant 1, 6
days).
GE Multilin
CONNECTOR TYPICAL
TYPE DISTANCE
ST 1.65 km
ST 3.8 km
C70 Capacitor Bank Protection and Control System
OTHER
Altitude: 2000 m (maximum)
Pollution degree: II
Overvoltage category: II
Ingress protection: IP20 front, IP10 back
2.2 SPECIFICATIONS

2.2.10 ENVIRONMENTAL

2-23
2