Policy-Map Type Queuing - Cisco Nexus 7000 Series Command Reference Manual

Cisco Nexus 7000 Series NX-OS Quality of Service Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .

policy-map type queuing

To create or modify a policy map and enter the policy map type queuing configuration mode, use the
policy-map type queuing command. To remove a policy map, use the no form of this command.
Syntax Description
match-first
queuing-policy
-map-name
que-dynamic
Defaults
None
Command Modes Global configuration
Supported User Roles network-admin
vdc-admin
Command History Release
4.0
4.2(1)
Usage Guidelines Use the
This command does not require a license.
Examples This example shows how to create or modify a queuing policy map:
switch(config)# policy-map type queuing my_policy1
switch(config-pmap-que)#
This example shows how to remove a type queuing policy map:
switch(config)# no policy-map type queuing my_policy1
switch(config)#
OL-23378-01
policy-map type queuing [match-first] {queuing-policy-map-name | que-dynamic}
no policy-map type queuing [match-first] {queuing-policy-map-name | que-dynamic}
(Optional) Specifies the policies associated with the first class that matches the
packet characteristics are executed. This is the default action if this option is not
specified.
Because this is the default action, you do not need to enter this variable; it
Note
is there to ensure compatibility with other systems.
Name assigned to a type queuing policy map.
Specifies already configured policy maps.
Modification
This command was introduced.
The que-dynamic variable was added.
service-policy command to assign policy maps to interfaces.
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
policy-map type queuing
QOS-53