Policy-Map Type Qos - Cisco Nexus 7000 Series Command Reference Manual

Cisco Nexus 7000 Series NX-OS Quality of Service Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .

policy-map type qos

To create or modify a policy map and enter the policy map type qos configuration mode, use the
policy-map type qos command. To remove a policy map, use the no form of this command.
Syntax Description
match-first
qos-policy-map-name
qos-dynamic
Defaults The software enters the policy map type qos configuration mode if you enter the policy-map command
without specifying a type.
Command Modes Global configuration
Supported User Roles network-admin
vdc-admin
Command History Release
4.0
4.2(1)
Usage Guidelines Use the
This command does not require a license.
Examples This example shows how to create or modify a type qos policy map:
switch(config)# policy-map my_policy1
switch(config-pmap-qos)#
This example shows how to remove a type qos policy map:
switch(config)# no policy-map my_policy1
OL-23378-01
policy-map [type qos] [match-first] {qos-policy-map-name | qos-dynamic}
no policy-map [type qos] [match-first] {qos-policy-map-name | qos-dynamic}
(Optional) Specifies the policies associated with the first class that
matches the packet characteristics are executed. This is the default action
if this option is not specified.
Note
Name assigned to a type qos policy map.
Specifies already configured policy maps.
Modification
This command was introduced.
The qos-dynamic variable was added.
service-policy command to assign policy maps to interfaces.
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
Because this is the default action, you do not need to enter this
variable; it is there to ensure compatibility with other systems.
policy-map type qos
QOS-51