Match Cos (Class Map Type Queuing) - Cisco Nexus 7000 Series Command Reference Manual

match cos (class map type queuing)

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
match cos (class map type queuing)
To define the class of traffic in a type queuing class map, use the match cos command. To remove the
match configuration, use the no form of these commands.
Syntax Description
cos-list
Defaults
None
Command Modes Class-map type queuing configuration
Supported User Roles network-admin
vdc-admin
Command History Release
4.0
Usage Guidelines To specify a list of values, use one of the following options:
•
•
Any modifications that you make to the class map type queuing changes the configuration for all ports
of the specified port type on all VDCs.
Only class maps of type qos support the optional not keyword form of this command.
Note
This command does not require a license.
Examples This example shows how to modify a type queuing class map to match on CoS:
switch(config)# class-map type queuing match-any 8q2t-in-q4
switch(config-cmap-que)# match cos 3
switch(config-cmap-que)#
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
QOS-28
match cos cos-list
no match cos cos-list
Specified class of service (CoS) value or list of specified CoS values. Valid values
are from 0 to 7.
Modification
This command was introduced.
Specify a range of values by separating each value with a dash.
Specify a noncontiguous list of values by separating each value by a comma.
Cisco Nexus 7000 Series NX-OS Quality of Service Commands
OL-23378-01