Cisco Nexus 7000 Series Command Reference Manual page 59

Cisco Nexus 7000 Series NX-OS Quality of Service Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
policy-map type network-qos
To configure a policy map and enter the policy map type network qos configuration mode, use the
policy-map type network-qos command. To remove a class map, use the no form of this command.
Syntax Description policy-class-name
default-nq-4e-policy
default-nq-6e-policy
default-nq-7e-policy
default-nq-8e-policy
my_template
Defaults qos
Command Modes
Global configuration
network-admin 
Supported User Roles
vdc-admin
Command History Release
5.1(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to configure a policy map of the type network qos:
switch# configure terminal
switch(config)# policy-map type network-qos my_template
switch(config-pmap-nqos)#
This example shows how to remove a policy map of the type network qos:
switch# configure terminal
switch(config)# no policy-map type network-qos my_template
switch(config)#
OL-23378-01
policy-map type network-qos {policy-map-name} {default-nq-4e-policy | default-nq-6e-policy |
default-nq-7e-policy | default-nq-8e-policy | my_template}
no policy-map type network-qos {policy-map-name} {default-nq-4e-policy |
default-nq-6e-policy | default-nq-7e-policy | default-nq-8e-policy | my_template}
Policy-map name. The policy map names can contain alphabetic, hyphen,
or underscore characters, are case sensitive, and can be up to 40 characters.
Specifies the default 4-ethernet policy (4-drop, 4-nodrop CoS).
Specifies the default 6-ethernet policy (6-drop, 2-nodrop CoS).
Specifies the default 7-ethernet policy (7-drop, 1-nodrop CoS).
Specifies the default 8-ethernet policy (8-drop CoS).
Specifies the policy map name of the type network qos.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
policy-map type network-qos
QOS-49