Class-Map Type Queuing Match-Any - Cisco Nexus 7000 Series Command Reference Manual

Cisco Nexus 7000 Series NX-OS Quality of Service Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .

class-map type queuing match-any

To modify a type queuing class map and enter the class-map configuration mode, use the class-map type
queuing match-any command.
Syntax Description queuing-class-map-name
Defaults
None
Command Modes
Global configuration
Supported User Roles network-admin
vdc-admin
Command History Release
4.0
Usage Guidelines
If the packet matches any of the criteria configured for this class map with the match command, this
class map is applied to the packet. Class maps of type queuing support only this option.
Any modification made to the class maps type queuing changes the configuration for all ports of the
specified port type on all VDCs.
You cannot delete system-defined queuing class map names. For more information on using the
class-map type queuing match-any command, see the Cisco Nexus 7000 Series NX-OS Quality of
Service Configuration Guide, Release 5.x.
This command does not require a license.
Examples This example shows how to modify a queuing class map:
switch(config)# class-map type queuing match-any 2q4t-in-q1
switch(config-cmap-que)#
Related Commands Command
show class-map
queuing
match cos
OL-23378-01
class-map type queuing match-any queuing-class-map-name
System-defined queuing class map name. For the list of system-defined
queuing class maps, see
Modification
This command was introduced.
Description
Displays class maps.
Defines the class of traffic in type queuing class maps.
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
class-map type queuing match-any
Table 1.
QOS-15